+- InB4TheLock (https://www.inb4thelock.com)
+-- Forum: General (https://www.inb4thelock.com/forumdisplay.php?fid=1)
+--- Forum: Alcohol, Tobacco and Firearms (https://www.inb4thelock.com/forumdisplay.php?fid=10)
+--- Thread: Muh-Gunsmithing (/showthread.php?tid=208)
Pages:
1
2
RE: Muh-Gunsmithing - Mexas Joe - 12-24-2021
Got my niece's BF (soon to be fiance) an AR lower for Xmas and I'll mentor him on his very first AR and build. He's a hell of a good young man and never had a dad around to teach him such things.
RE: Muh-Gunsmithing - Mexas Joe - 01-10-2022
Niece's BF got his AR build finished. He was excited to try it out.
First round fires, ejects and chamber's 2nd round. 2nd round just clicks and there is a small mark on the primer from the firing pin.
Any ideas? I've not had this happen. Headspace?
PSA lower/Aero upper.
RE: Muh-Gunsmithing - dave - 01-10-2022
Is the bolt going into battery? Need a stronger main spring?
RE: Muh-Gunsmithing - Stank Delicious - 01-11-2022
Buffer spring, hammer spring or trigger spring. That or shitty ammo.
RE: Muh-Gunsmithing - Mexas Joe - 01-13-2022
Ammo is decent Winchester 55grain fmg.
Headspace good. Weapon apparently needed lube and some 62 grain rounds for the break in. Go figure.
RE: Muh-Gunsmithing - Mexas Joe - 06-11-2022
Getting behind on this thread.
Mounting Trijicon Credo 1-8 on my last AR build today. 18' barrel. I wanted mid-range but can still QCB with this rig.
![[Image: e38ozza.jpg]](https://i.imgur.com/e38ozza.jpg)
![[Image: ifQemJ0.jpg]](https://i.imgur.com/ifQemJ0.jpg)
RE: Muh-Gunsmithing - Mexas Joe - 06-11-2022
I run a G22C as my favorite. This here is a new one I decided to throw on a Holosun optic.
But why do you have multiple G22's Mexas? You can only shoot one at a time.
Because Feck You. That's why I need more than one.
![[Image: JTz313m.jpg]](https://i.imgur.com/JTz313m.jpg)
RE: Muh-Gunsmithing - Mexas Joe - 06-15-2022
Got errything for an AR-10 build. Muh first of that caliber. May do that this weekend.
RE: Muh-Gunsmithing - Mexas Joe - 06-28-2022
![[Image: YvBwZyp.jpg]](https://i.imgur.com/YvBwZyp.jpg)
![[Image: Pr4b0yA.jpg]](https://i.imgur.com/Pr4b0yA.jpg)
Waiting on a new slide release and this G22 will be done. Now just need to sight her in.
Holy Feck I have a stack of weapons waiting to get sighted in. Don't wanna shoot in the 100 degree heat tho.
RE: Muh-Gunsmithing - Augie91 - 06-28-2022
Nice! Do you have plenty of places to shoot the AR? Still need to shop for one, SO fun to shoot.